Core Features
Device Information
  • Display all key device information, e.g. reading, temperature, total, valve voltage etc.
  • Specify a setpoint for flow and pressure controllers
  • Assign a device name, e.g. name of measuring point ID
  • Change the device address (Modbus, Profibus)
  • Visualization of measured data
  • Adjust the control speed
Operating State Monitoring

The software monitors key operating parameters and indicates irregularities such as:

  • Sensor and communication errors
  • Unusual device behavior (instability, contamination, etc.)
Switch Measurement Units & Gas Type
  • Select the desired units of measurement
  • For devices that have been calibrated for several different gases (multigas), user can switch to different stored gas data sets
Plug & Play with USB Cable
  • Digital communication cable USB/RS485 (PDM-U Art. 328-2169) and versatile cable accessories ensure that measurement and control devices can be operated troublefree from the PC.
Logging & Mixing Module (optional)
  • Mix gases with fixed percental proportions
  • Master/Slave mixing function
  • Visualize and log all measured data
  • Export as CSV file for further use in MS Excel or similar program
Calibration & Adjustment (optional)

The calibration module can be used to check for deviations in the red-y smart series mass flow meters and controllers.
The supplemental adjustment module permits manual or automatic adjustment.

System requirements

The get red-y 5 software runs under Windows XP, Vista, 7, 8 & 10.
For required hardware, please refer to the operating manual of the software.